Bright Biomethane is a major supplier of biogas upgrading systems. We have created this animation video of our system to show you how biogas upgrading works and to give you a better understanding on why to use it.
To upgrade biogas to biomethane you need a biogas upgrading plant, also referred to as a biomethane plant, biogas upgrader or biogas purification plant. As the name suggests, the output of the process is biomethane. Biomethane, also known as Renewable Natural Gas (RNG), is a pipeline-quality product gas and is similar to natural gas. Biomethane is a CO2 neutral, clean fuel without particles, that provides a good alternative to fossil fuel. It can be injected into the natural gas grid or it can be compressed to CNG (compressed natural gas) to use as transport fuel.
The biggest difference between the renewable product gas biomethane and the versatile fossil fuel natural gas is that biomethane is produced from biomass and waste. Biomethane is produced by converting biomass and waste, such as manure, agricultural waste, unpacked expired food products and sludges, via anaerobic digestion into biogas. This biogas, mainly containing CH4 (55%) and CO2 (45%) is then upgraded or purified in a biogas upgrading system.
The biogas produced at the biogas plant is not pure biomethane (CH4). During the digestion process many other chemical components are produced, such as carbon dioxide (40%-45% CO2), air (1%), hydrogen sulfide (H2S), hydrogen, Volatile Organic Components (VOCs) and siloxanes.
Upgrading of the biogas to natural gas quality by membrane gas separation means that CO2 and other undesired components are filtered out. That is where the Bright Biomethane biogas upgrading system comes into play.
There are many different biogas upgrading technologies available on the market. All with the same goal: to separate methane from carbon dioxide and other chemical components and to produce biomethane. Examples of technologies to purify biogas include amine scrubbing, pressure swing absorption, water scrubbing, organic physical scrubbing, cryogenic distillation and membrane separation.
Each technology has different properties, efficiency rates and can be used for different types of biogas. Bright Biomethane uses membrane technology for the biogas upgrading to achieve maximum performance and recovery of methane.
Bright Biomethane systems are equipped with a 3-stage membrane system. The highly efficient membranes for the separation of methane from biogas ensure an efficiency of more than 99.5%. In a membrane purification system, the biogas first enters the pre-treatment system where moisture and contaminations, such as H2S, are filtered out. After that, the gas is compressed to reach the required pressure before entering the membrane system.
The remaining gases after the pre-treatment include CH4 and CO2. The compressed gas mix flows through the 3-stage membrane system where the CO2 and CH4 are separated. This 3-step membrane arrangement assures high biomethane quality (according to specifications) with maximum CH4 recovery of 99.5% and higher. In the after-treatment system, the produced biomethane is analyzed and checked if all specifications are fulfilled. Also, TetraHydroThiophen (THT) is added that gives the biomethane an odorant. After this step, the biomethane is injected into the national gas grid or stored as compressed natural gas (CNG).
Bright Biomethane fully understands their clients. For that reason, we developed optimal heat recovery (> 0,25 kWt/Nm3 biogas) by recovering the heat from the process. The system has the lowest electricity consumption (0,22 kWh/Nm3 biogas) and almost all of the electricity that is consumed can be recovered as heat, which means no electricity loss and covering the main energy consumption of the biogas facility.
More reasons why you can benefit from our biogas upgrading technology.
CO2 Recovery: producing food grade CO2
In addition to the production of biomethane, the Bright Biomethane systems may be used to recover and liquefy CO2 to create an extra source of revenue for the plant owner. What is CO2 recovery and what is CO2 liquefaction? The CO2 that is filtered after entering the 3-stage membrane system can be recovered and liquefied. A CO2 recovery system can be easily integrated with the standard 3 or 2 stage Bright Biomethane membrane biogas upgrading systems. In this CO2 liquefaction system, the CO2 is compressed, filtered and cooled to reach the required purity and liquid state.
The liquefaction plant can produce food grade CO2, which can be used in the food and beverage industry and in greenhouses. It can also be used in the refrigeration sector and in slaughterhouses. A great advantage of the CO2 liquefaction recovery system is that the methane slip is reduced to zero as any remaining CH4 returns to the biogas upgrading plant.
Applications of Biomethane
The methane-rich product gas can be used for different purposes. Biomethane or RNG can be injected into the natural gas grid, through which it is delivered to your central heating system or to your gas stove. That means that the gas that will heat up your house and warm up your dinner could be produced from cow poop.
Another option is to use the gas as transport fuel (CNG) for natural gas vehicles (NGV). CNG is used more and more widely across the globe. According to CNG Europe there are 3776 CNG stations in 2018 in Europe alone. Therefore, transforming your biogas into compressed biomethane gas is a clean and prosperous solution.